Universal holder for tablet up to 10,1 or 13" in your plane cockpit with a high suction lever cup or or a tiller clamp bor 2 axes Ultra light or fo cockpit canopy with 360 ° swivel joint. Accepts all touchscreens tablets up to 10,1 ou 13 ": Touchlet SX7, Samsung Galaxy Tab 3 8 '', Asus Nexus 7 ...
Warning: Last items in stock!
AERODISCOUNT now has these supports manufactured on our behalf under our brand EASYCOCKPIT
Fastening clamp and ball joint with tablet holder for aircraft.
STABILITY SAFETY AND SIMPLICITY
This universal holder ensures stability and safety to your Tablet when you use it in an airplane.
Ideal for GPS applications, this support gives you full access to the various features of your Tablet and hands-free, hands-free viewing.
Its suction cup mounting system is both very efficient and easy to use. The depression of the suction cup due to its lever principle is important (sucking a large air volume). The vibrations have a low impact on your tablet, it is well retained and remains in place. Even in turbulence, your tablet will remain firmly fixed.
Made of two pieces, a suction cup holder and an adjustable clip bracket that extends to the size of your tablet, it holds it firmly and eliminates all risks of dropping it.
For maximum safety, the bracket secured to the windscreen by means of its suction cup with a high vacuum, your tablet will also be held by the hooks at the end of the jaws of the support.
The adjustable jaw system is locked by a brake lever at the rear of the size adjustment rod. Your shelf will be sheltered in its casing with pressure cushions in soft foam, it will be able according to the circumstances to be oriented at leisure because the head is orientable 360°
ADJUSTABLE AND COMPATIBLE
This support allows you to easily orient your tablet in optimal position so that it is visible on one side without reflection and the touch screen perfectly accessible.
In both landscape and portrait mode, you can adjust the viewing angle to enjoy the mode that's right for you.
Compatible with all 10,1 or 13 " tablets, Suitable for tablets with a width between 110 and 215 mm.
You can use it with an iPad Mini, Acer Tab, Touchlet SX7, Asus Google Nexus 7, Archos, HTC Flyer, Samsung Galaxy Tab 2 and Tab 3, Amazon Kindle, Motorola Xoom, Sony Tablet etc.
It has the advantage of not blocking the back of the tablet which allows better ventilation than if it is in a shell support.
The holding hooks allows large thickness so it also make it possible to use this holder with apparatus in a shell.
For temporary use, for example, in a flying club, the suction cup can be removed in a few seconds.
USE AND IMPLEMENTATION
Bond the adjustable support base and the suction cup base with the pivot ball provided for this purpose by unscrewing the ring, passing the rotation ball through the ring then inserting the ball in the 2 half cylinder then tighten the 2 half together
Clean the surface on which you will stick the suction cup, it is best that it be flat.
Remove the protective film from the suction cup
Press the suction cup firmly against the windscreen and fold down the locking lever (you can wet this suction cup with water or even saliva to ensure a better seal).
Place your tablet and adjust the rubber clips of the holder so that it tightens it. The support must have both supports in the low position if you are in landscape mode.
Clamp fixing up to 3.5 cm thick